GIS4043 final project


    For this week's lab, I completed the final project for GIS4043. This lab pertained to the Bobwhite-Manatee Transmission line project. There were a few questions to answer for this lab: How many schools and homes are in close proximity to the transmission line, and are there any environmentally sensitive lands affected by the transmission line? The preferred corridor for the transmission line was given. The image above is the map for objective 3, which asked about schools. The results of this project can be found here: https://arcg.is/11Cr5b

 

Comments

Post a Comment

Popular posts from this blog

Waypoints and Positions

Image
      In this week's lab, I used different methods to determine the accuracy of data. In part A, I compared precision data. My results are below: Horizontal accuracy: -82.319 Horizontal precision: 22.14 Vertical accuracy: 27.83 Vertical precision: 29.45 My vertical accuracy and precision values are very close to each other, but my horizontal accuracy and precision values are very different.  Horizontal accuracy is measured by comparing a measurement to its known true value, while horizontal precision is measured by measuring the proximity to other values. 
Read more

Data Quality - Standards

Image
      In this week's lab, I determined the accuracy of road networks. I did this by selecting test points of intersections on the ABQ_Stre ets_Sample layer, and then zoomed into each test point to determine the 'true' location of the intersection. I added XY coordinates to both the test points layer, and the reference layer, and calculated the accuracy statistics. The t ested horizontal accuracy of this dataset is +/- 423 meters at 95% confidence level.
Read more

GIS Programming

Image
      This week, I started the GIS Programming course. This course goes over how Python is used in relation to ArcGIS. I have never used Python or any other coding language before, so I expect this course to be challenging, but I look forward to learning. For this week's lab, I got an introduction to IDLE and ArcGIS Notebooks.  Prior to starting this lab, I watched the Module 1 lectures to gain an understanding of IDLE, ArcGIS Notebooks, and creating flowcharts. The first step for this lab was to bring the GISProgramming file from the R drive to the S drive. I then ran the CreateModFolders.py file to create module folders for the entire course. This task gave me the opportunity to open IDLE and use IDLE. I then wrote a Python script in IDLE to convert degrees to radians, and create the corresponding flowchart in Google Slides. I had some trouble starting this lab because I have never used Python before, but I used the lectures to guide me through. It also wasn't obv...
Read more